Description

The Rode M5 Matched Pair of Cardioid Condenser Mics is New Delivered to all areas of the UK using our roadie delivery service.

The Rode M5 patched pair of stereo pencil condensers are a great way to record high quality stereo sounds without breaking the bank! Of course there are loads of options that a matched pair open up beyond the usual XY configurations. Try experimenting with the Glyn Johns technique or even just micing the snare from above and below. You can get creative with the M5s because they sound so natural, what you hear is what you get!

Here's what Rode say about the M5 Matched Pair

Designed and made in Australia, the M5 is a compact 1/2” cardioid condenser microphone with low noise and a full frequency response. A result of many years’ experience building the award-winning NT5 microphone, RØDE has succeeded in making a high-quality ‘pencil’ style permanently polarized condenser that will impress even the most demanding of artists and engineers.

Ideal for studio recording and live on stage, the M5 is equally at home on a range of acoustic instruments, choirs, or anywhere you would employ a small diaphragm condenser microphone, either individually or as a stereo array. This matched pair has been carefully selected to ensure a variation of no more than 1dB sensitivity between the microphones. A premium foiled certificate is supplied to verify the authenticity of the pair. The M5 is finished with RØDE’s proprietary ceramic coating which offers a sleek matt black finish, and is supplied with WS5 windshields and RM5 stand mounts.

In the Box

• x2 Mic Clips
• x2 Windshields 

Specifications 

• Acoustic Principle: Pressure Gradient
• Active Electronics: JFET impedance converter with bipolar output buffer
• Polar Pattern: Cardioid 
• Frequency Range: 20Hz ~ 20kHz
• Output Impedance: 200Ω
• Equivalent Noise: 19 dBA SPL (as per IEC651)
• Maximum Output Level: +13.5 dBu
• Sensitivity: -34 dB re 1V/Pa (20mV @ 94 dB SPL) ± 2dB @ 1kHz
• Dynamic Range: 121 dB SPL
• Maximum SPL: 140 dB SPL
• Signal-to-Noise Ratio: 75 dBA SPL (as per IEC651)
• Power Requirements: P24 and P48
• Output Connection: XLR Balanced output between pin 2 (+), pin 3 (-) and pin 1 (ground)