Description
The sE Electronics BL8 Boundary Microphone is New Delivered to all areas of the UK using our roadie delivery service.
Bullet-proof, built like a tank and ready for the road, your secret weapon for a variety of applications such as kick drums and other high SPL sources. Amazing for recording Kick Drum, Cajon, Piano, Speech, Conferencing, Room Miking / Ambience, Stage Floor Miking.
Check out Drummer T.J. Steinwart from the band Feel on how he uses the sE BL8 Boundary microphone to record drums for his clients and band.
Key Features:
- Compatibility:
Compatible with SE’s sE8 omni capsule & The Kelly Shu Flatz Isolation System (Sold separately) - Beautiful low end:
Reproduces low frequencies with stunning accuracy. - Utility:
Integrated low-cut filter & pre-attenuation pad enable a variety of applications
Specifications:
- Connection: XLR
- Sound:
– Polar pattern: Half-cardioid
– Frequency range: 20Hz – 20kHz
– Sensitivity: 25 mV/Pa (-32 dBV)
– Max. SPL (0.5% THD): 143 / 153 / 163 dB SPL (0/10/20 dB attenuation pad)
– Equivalent noise level: 14 dB(A)
– Dynamic range: 129 / 139 / 149 dB (0/10/20 dB attenuation pad)
– Signal-to-noise ratio: 80 dB
– Low-cut filter: 80 / 160 Hz, 6 dB/oct, switchable
– Attenuation pad: 10 / 20 dB, switchable
– Recommended load impedance: >1k Ohms - Dimensions:
– Width: 95mm / 3.74“
– Length: 139mm / 5.47“
– Height: 28.5mm / 1.12“
– Weight: 538g / 18.98lbs - Power:
– Required: 48 Volts according to IEC 61938
– Electrical Impedance: 60 Ohms
– Current consumption: 5.0mA
