Description
The Micpro team take a look at the Audio-Technica ATW-1102 Dynamic Handheld Digital Wireless System by , available in the Uk from a UK supplier & UK Warranty.
Get into affordable digital wireless with Audio-Technica's ATW-1102 System 10 wireless handheld microphone/transmitter unit. These hi-fi digital systems operate with advanced 24-bit operation in the 2.4GHz range. System 10 gear is perfect for MI/live performance, fixed installation, public address, A/V rental houses, and places of worship. It offers true-diversity operation, easy setup, automatic frequency scanning with interference-free performance, and all the advantages of a high-quality, professional wireless system at an extremely affordable price.
At the touch of a button, Audio-Technica's ATW-1102 System 10 wireless units automatically determine and set the best available frequency (open channel). This is particularly useful when employing multiple wireless systems, thereby avoiding interference and intermodulation. When there is a need to utilize multiple wireless systems simultaneously, up to eight channels/units may be used together without any frequency coordination problems or group selection issues. An easy-to-read LCD information display provides convenient visual indications of settings and operation status.
Key Features
- Affordable digital wireless unit
- Includes an Audio-Technica ATW-T1002 handheld dynamic unidirectional microphone/transmitter
- Clear sound quality and rock-solid, dependable performance
- Advanced 24-bit operation in the 2.4GHz range
- Automatic frequency scanning finds an open channel at the touch of a button
- True-diversity operation selects the better signal from the 2 receiver sections, reducing dropouts
- Up to 8 units can be used together simultaneously
- Balanced XLR and unbalanced 1/4" output jacks enable use with a wide variety of audio gear
- Ground-lift switch helps eliminate audible hum caused by ground loops between the sound system and receiver
In the Box
- Wireless Microphone
- Body Pack
- Mic Clip
- Receiver
- Power Supply
Technical Specifications
Overall System
- Operating Frequencies: 2.4 GHz ISM band (2400 to 2483.5 MHz)
- Frequency Response: 20 Hz to 20 kHz (Depending on microphone type)
- Operating Range: 30 m (100') typical (Open range environment with no interfering signals)
- Total Harmonic Distortion: <0.05% typical
- Operating Temperature Range: 0° C to +40° C (32° F to 104° F) (Battery performance may be reduced at very low temperatures)
Handheld Transmitter
- RF Power Output: 10 mW
- Spurious Emissions: Following federal and national regulations
- Battery Type: Two 1.5V AA (not included)
- Battery Life: >7 hours (alkaline) (Depending on battery type and use pattern)
- Dimensions: 254.8 mm (10.03") long, 50.0 mm (1.97") diameter
- Net Weight: 280 grams (9.9 oz) without batteries
- Accessories Included: AT8456a Quiet-Flex stand clamp
Body Pack
- RF Power Output: 10 mW
- Battery Life: >7 hours (alkaline) (Depending on battery type and use pattern)
- Battery Type: Two 1.5V AA (not included)
- Dimensions: 70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D
- Input Connections: Four-pin Locking Connector, Pin 1 – GND, Pin 2: INST INPUT, Pin 3 – MIC INPUT, Pin 4: DC BIAS +9V
- Net Weight: 100 grams (3.5 oz) (without batteries)
- Spurious Emissions: Following federal and national regulations
Receiver
- Receiving System: Diversity (frequency/time/space)
- Maximum Output Level: XLR, balanced: 0 dBV, 1/4" (6.3 mm), unbalanced: +6 dBV
- Power Supply: 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply
- Dimensions: 190.0 mm (7.48") W x 46.2 mm (1.82") H x 128.5 mm (5.06") D
- Weight: 290 grams (10.2 oz)
- Accessories Included: Power supply
